Spraying process for repairing automobile body
Release Time:
Mar 26,2021
1. An automobile body repair spraying process, which is characterized in that it includes the following steps:
1. An automobile body repair spraying process, which is characterized in that it includes the following steps:
1) Clean the area to be repaired with a detergent, then clean it with water, and then clean the surface of the part with a paint thinner;
2) Polish the area to be repaired Area, forming an inclined surface opening, the upper part of the inclined surface opening is higher and the lower part is lower;
3) Spray putty powder to level and dry, then spray the tackifier, dry for 10 minutes, and scrape the thickness of the tackifier evenly with a rubber scraper , Keep polishing the area to be repaired as a bevel, dry for 30 minutes, sanding the edges;
4) Spray the tackifier again to the polished repair area, and then spray the intermediate coating to fill in small pits and pinholes after drying And polish the traces, polish to smooth, keep the area to be repaired on a slope, thoroughly polish the original paint layer on the car body, remove 80%-90% of its gloss; 5) Dilute and mix the car body paint and curing agent, and mix After mixing, spray from the upper part of the spray bevel port to the lower part, and then dry for 6 hours.
Keywords:
You Can Also Learn More About Industry Trends
Automotive maintenance equipment service provider
Contact Us
Yantai Precision Science And Technology Co., Ltd.
Tel: 0086-0535-6951590
Fax: 0086-0535-6951590
Mobile: 0086-15969655823
Email: sales@precision4tech.com
Add: No.206 Tianshan Road, Economy and Technology Development Zone, Yantai, Shandong Province,China